Expert Help & Advice: +44 208 543 9696 Custom Finance Options Available

Aromatic Pine HTPLA 1.75mm 500g spool

Aromatic Pine HTPLA 1.75mm 500g spool


Availability: Available on backorder SKU: HTAR1705-PIN Categories: , ,
  • Description
  • Product Specifications
  • Reviews


A “noble” tradition: Wood-filled HTPLA made from our family tree!

Five years in a row, we’ve turned a tree into filament! This is a tedious process where we transform pine needles into a fine, dry powder. We then add them to our plastic pellets to make this special filament. Learn more about the process in our YouTube live stream below.
In 2017, as shown in the video, we brought you a rich translucent brown that perfectly highlighted the real flecks of Christmas tree. The next year, we mixed it up a little by using our matte fiber base. This resulted in a creamy, opaque base with natural, dark brown flecks, giving it a great wood-like finish.
We just couldn’t decide which version we like best, though: Translucent or Matte. So we brought them both back!!
Special considerations when printing HTPLA – Depending on your hardware, HTPLA can heat treat inside your hotend, creating a bulb that restricts extrusion. This bulb can be mechanically removed or overcome with higher-than-standard nozzle temperatures. Consider our blog for more on avoiding jamming.
Special considerations when printing Matte Fiber – Matte fiber readily absorbs moisture, affecting printing. Dry material prints best, but keeping material dry is challenging. With wet material, you can reduce flow % to reduce over-extrusion. Keeping printing speed up and temperature down also helps reduce stringing and oozing, though strings can be easy to remove after printing. Still can’t get a good result? Dry the material at less 80 deg C (175 deg F) until the result improves.

Special considerations when heat treating HTPLA – Heat treating can increase the usefulness of HTPLA from about 60 deg C to 160 deg C (140 deg F to 320 deg F). This transformation only requires a few minutes in a warm oven, but can include deformation will include shrinkage. Scale parts before printing to compensate for shrinkage. To test the process, print a small cube, measure x/y and z dimensions. Bake at 120 deg C (250 deg C) for 30 minutes, let cool, and measure again. Compare dimensions to calculate shrinkage and/or growth.

You may notice a pleasant pine scent when filament is warm like during printing or heat treating!
Call Now ButtonCall Now