FlashForge Creator 5 Pro 3D Printer
SKU: 10001103001
Key Features
- 4 Independent Toolheads – True multi-colour and multi-material printing
- Up to 500% Faster Multi-Colour Printing – Reduced tool switching delays
- Zero Purge Waste – Maximum material efficiency with minimal waste
- High-Speed Performance – Print speeds up to 600 mm/s
- Automatic Calibration & Levelling – Fully automated setup and optimisation
- Smart Print Compensation – Enhanced dimensional accuracy and surface quality
- Advanced Multi-Material Capability – Combine multiple materials within a single print
- Fully Enclosed Rigid Frame – Improved stability and print consistency
- Active Heated Chamber – Chamber temperatures up to 65°C
- HEPA & Carbon Air Filtration – Cleaner and safer printing environment
- Continuous Airflow System – Stable internal temperatures during long prints
THIS IS A PRE-ORDER FOR THIS ITEM
Categories:
FlashForge Creator 5 Pro 3D Printer
- FlashSwap 4-toolhead system – Zero purge waste, near-instant material switching
- Up to 500% faster multi-colour printing – vs. conventional purge-based systems
- Fully enclosed with active heated chamber – Up to 65°C for ABS, ASA, PA, PC, and composites
- H13 HEPA + Coconut Carbon dual filtration – Medical-grade air filtration for VOCs and fine particles
- 600 mm/s print speed, 30,000 mm/s² acceleration – High-performance CoreXY motion system
- Fully automatic calibration and levelling – With smart compensation for consistent results
- Door-open detection and chamber temperature monitoring – Enhanced safety and print stability
FlashSwap 4-Toolhead System — Zero Purge Waste
The Creator 5 Pro uses FlashSwap, a fully automatic 4-toolhead tool-changing system. Each toolhead operates independently, physically swapping in and out of position during printing. Unlike single-nozzle multi-material systems, there is no purge block, no waste tower, and no filament loading cycle between colour or material changes.
Flashforge's own benchmark demonstrates the difference: a multi-colour Rubik's Cube takes 2.6 hours and 47.5g of filament on the Creator 5 Pro, compared to 16 hours and 290g on a conventional purge-based system — 84% less time and 84% less material waste.
High-Speed CoreXY Performance
Built on a fully enclosed, rigid CoreXY frame, the Creator 5 Pro delivers print speeds up to 600 mm/s with acceleration up to 30,000 mm/s², while maintaining dimensional accuracy and repeatability across the full 256 × 256 × 256 mm build volume. The enclosed structure minimises vibration and thermal drift, keeping prints stable at high speeds.
Engineering-Grade Material Support
The Creator 5 Pro supports an extensive range of filaments across standard, flexible, soluble, and high-temperature engineering grades - all within a single machine:
- Standard: PLA, PETG, PET, SILK
- Flexible: TPU (90–95A / 64D)
- Soluble supports: PVA, BVOH
- Carbon-fibre & glass-fibre composites: PLA-CF, PETG-CF, PA-CF, PET-CF, PAHT-CF, ASA-CF(GF), ABS-CF(GF), PPA-CF(GF)
- Engineering: ABS, ASA, PA (Nylon), PC, PC-ABS, PPS-CF
- Multi-material blends: S-Multi, S-PATH
Fully Enclosed Heated Chamber & Dual Air Filtration
The Creator 5 Pro features a fully enclosed build chamber with active heating up to 65°C and a continuous airflow system, providing the thermal stability required for engineering materials such as ABS, ASA, Nylon, and PC that are prone to warping in open-frame environments.
A dual-layer filtration system - H13 HEPA (medical grade) and premium Coconut Carbon - captures fine particulates and eliminates VOCs released during printing with ABS, ASA, Nylon, and composite filaments, making it safe for use in offices, labs, and shared workspaces.
Note: The Creator 5 Pro's enclosure, heated chamber, and filtration are exclusive to the Pro model and are not available on the standard Creator 5. The two models cannot be upgraded between each other due to structural differences.
Professional Automation & Monitoring
The Creator 5 Pro is built for reliable, low-intervention operation. It includes fully automatic bed calibration and levelling with smart compensation, filament runout and tangle detection, door-open detection, and chamber temperature monitoring. A built-in camera enables remote monitoring of prints in progress, with Wi-Fi and network connectivity for full workflow integration.
Key Specifications
Why Buy From Us
- UK-based stock for fast delivery
- Dedicated technical support
- Trusted supplier to education and commercial sectors
- Full range of filaments and accessories available