Magigoo PRO PC 50ml

Magigoo Pro PC – 3D Printing Adhesive (50ml)

Magigoo Pro PC is specially designed for 3D printing with polycarbonate (PC) filaments. It offers a strong adhesion platform to reduce warping and ensure reliable prints. Polycarbonate filaments are known for their difficulty with bed adhesion and tendency to warp during printing, but with Magigoo Pro PC, you can effortlessly tackle these challenges.

This easy-to-use adhesive reduces warping, caused by differential cooling, for consistent and successful prints. Apply a thin layer of Magigoo Pro PC (orange label) before printing with polycarbonate filaments for the best results.

Key Features:

Designed for Polycarbonate Filaments – Excellent adhesion for polycarbonate-based filaments.
Easy Application & Release – Apply before printing, and prints pop off easily once cooled.
Reliable Printing – Reduces warping and enhances first-layer bonding for repeatability.
No Tools Required – Prints detach effortlessly without scrapers or excessive force.
50ml Bottle – Long-lasting and cost-effective.

How to Use:

1. Shake the bottle well before use.
2. Apply a thin layer of Magigoo Pro PC on a cold print bed.
3. Start printing with polycarbonate filaments.
4. Once the print cools, it will detach easily.
5. For optimal results, reapply before each print.

Magigoo Pro PC Compatibility:

• Polymaker: PolyMax PC, PolyLite PC, PolyMax PC-FR, PC-ABS, PC-PBT
• XSTRAND™ (TM) GF30-PC by Owens Corning
• Clariant: PC and PC-ABS
• BASF/Innofil3D: ASA
• 3DXTech: CarbonX™ CF-PC
• Fillamentum: PC-ABS
• And more…

Upgrade your 3D printing experience with Magigoo Pro PC – the ultimate adhesive solution for polycarbonate-based filaments!