PolyDissolve S1 is a PVA based water dissolvable support for PLA, TPU, PVB and Nylon based filaments from our portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
PolyDissolve S1 can support PLA, PVB, TPU and Nylon based materials from our portfolio.
Printing Temperature: 215C - 225C
Bed Temperature: 25C - 60C
Printing Speed: 30mm/s - 40mm/s
Fan: ON
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 80C for 12h
(Only if the material has absorbed moisture)
PolyDissolve S1 is very hygroscopic, please make sure to use a dry box.
It can take 6-12hours to fully dissolve depending on your setup.
You can speed up the process:
- By increasing the water temperature
- By changing the water regularly
- By adding a pump to make the water flowing