For quality 3D printing Easily adjust the temperature with 6 presets (35C, 45C, 55C, 65C, 75C, and 85C). Built-in timer with a maximum time of 48 hours. Note: The temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent. The temperature distribution inside the dryer is NOT uniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower. Please note - the plug of the 220v filament dryer is a type c plug, suitable for use in most European countries. You will need an adapter to use the dryer in the UK.

<p><strong>For quality 3D printing</strong></p>
<ul>
<li>Easily adjust the temperature with 6 presets (35C, 45C, 55C, 65C, 75C, and 85C).</li>
<li>Built-in timer with a maximum time of 48 hours.</li>
</ul>
<div class="rich-text-paragraph" data-eleid="2">
<span class="text-only" data-eleid="3"><strong>Note: </strong>The temperature readings are directly measured at the tip of the temperature sensor, located about 15 mm away from the hot air vent. </span><span class="text-only" data-eleid="18">The temperature distribution inside the dryer is <strong>NOT </strong>uniform. The temperature in a place close to the hot air vent is higher and the temperature in a place far away from the hot air vent is lower.</span>
</div>
<div data-eleid="2"></div>
<div data-eleid="2">Please note - the plug of the 220v filament dryer is a type c plug, suitable for use in most European countries. You will need an adapter to use the dryer in the UK.</div>

PrintDry Filament Dryer (PRO3)

Double-wall chamber Used with the PrintDry Filament Dryer PRO/PRO3. To dry and feed up to 5Kg filament spool with max 300mm or 12? spool outside diameter. Note: When drying and printing a new 12 filament spool, please set the temperature 10C lower to start with. After about 25% filament has been printed, then the temperature can be reset to the normal recommended temperature for this filament. This will avoid filament over-heating. Package includes: Plastic tray x1 Long metal shaft x1

<ul>
<li>Double-wall chamber</li>
<li>Used with the PrintDry Filament Dryer PRO/PRO3.</li>
<li>To dry and feed up to 5Kg filament spool with max 300mm or 12? spool outside diameter.</li>
</ul>
<p><strong>Note: </strong>When drying and printing a new 12 filament spool, please set the temperature 10C lower to start with. After about 25% filament has been printed, then the temperature can be reset to the normal recommended temperature for this filament. This will avoid filament over-heating.</p>
<p>Package includes:</p>
<ol>
<li>Plastic tray x1</li>
<li>Long metal shaft x1</li>
</ol>

PrintDry Large Spool Kit for Dryer PRO/PRO3

To prevent the filament from absorbing moisture The ultimate filament storage solution for 3D printing filaments Include: 5-pack with a vacuum pump (Filament spool not included) Features 1) Vacuum valve and pump: A special valve and a pump are used to suck the air out to create a vacuum seal and this will prevent the moisture in the air from getting into the container. 2) Stronger structure: In order to hold a strong vacuum seal, both the lid and the container itself have been specially designed. 3) Vacuum indicator: when completely vacuum-sealed, the center of the vacuum valve will collapse inward from its original dome shape. Testing The vacuum filament container has been tested with a 750g filament spool inside for 30 days. The graph below shows the changes of the relative humidity (grey line) inside the container and the ambient humidity (red line) as the storage time increases. Five pouches of 15g desiccant are included in the container.

<p>To prevent the filament from absorbing moisture<br>
The ultimate filament storage solution for 3D printing filaments<br>
Include: 5-pack with a vacuum pump (Filament spool not included)</p>
<p><strong>Features</strong><br>
1) Vacuum valve and pump:<br>
A special valve and a pump are used to suck the air out to create a vacuum seal and this will prevent the moisture in the air from getting into the container.</p>
<p>2) Stronger structure:<br>
In order to hold a strong vacuum seal, both the lid and the container itself have been specially designed.</p>
<p>3) Vacuum indicator:<br>
when completely vacuum-sealed, the center of the vacuum valve will collapse inward from its original dome shape.</p>
<p><strong>Testing</strong><br>
The vacuum filament container has been tested with a 750g filament spool inside for 30 days. The graph below shows the changes of the relative humidity (grey line) inside the container and the ambient humidity (red line) as the storage time increases. Five pouches of 15g desiccant are included in the container.</p>

PrintDry Vaccum Container (5 Pack)

Double-wall Used with the PrintDry Filament Dryer PRO3. To dry and feed two more additional spools with max 200mm or 8 spool outside diameter. Note: Due to the stackable chamber design, you can use multiple additional chamber kits per dryer; however, the temperature and stability decrease as you add more chambers. We don't recommend using more than two additional chamber kits per dryer.

<div class="woocommerce-product-details__short-description">
<ul>
<li>Double-wall</li>
<li>Used with the PrintDry Filament Dryer PRO3.</li>
<li>To dry and feed two more additional spools with max 200mm or 8 spool outside diameter.</li>
</ul>
<p><strong>Note: </strong>Due to the stackable chamber design, you can use multiple additional chamber kits per dryer; however, the temperature and stability decrease as you add more chambers. We don't recommend using more than two additional chamber kits per dryer.</p>
</div>
<p class="stock in-stock"></p>

PrintDry Additional Chamber Kit for Dryer PRO/PRO3

Smart Vacuum Filament Container! PrintDry is proud to announce our newest filament storage solution — a SMART solution! With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button. No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops. This prevents leakage over an extended period of time. Store your filament easily without worrying about leaks. Why vacuum storage is important for filament? Excess moisture in filament leads to defects in 3D printing. If some of your prints look like the pictures below, this may be due to the water content built up in the filament. Maintaining negative pressure between -20 ~ -25 kPa. One Touch Sealing Hold Up To 3 Spools One-touch To Open Rechargeable Battery The battery last about 2 months if only opening and closing once a day. Additional Features: Specifications:

<h1 id="h:smart-vacuum-filamen" class="page-anchor">
<span class="text-italic"><span class="bold">Smart </span></span><span class="bold">Vacuum Filament Container!</span>
</h1>
<p><img loading="lazy" class="aligncenter size-large wp-image-5536" src="https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-1024x576.gif" alt="" width="1024" height="576" srcset="https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-1024x576.gif 1024w, https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-600x338.gif 600w, https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-300x169.gif 300w, https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-768x432.gif 768w, https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-24x14.gif 24w, https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-36x20.gif 36w, https://www.printdry.com/wp-content/uploads/2021/09/gifs-1_1-min-48x27.gif 48w" sizes="(max-width: 1024px) 100vw, 1024px"></p>
<p><span class="bold">PrintDry</span> is proud to announce our newest filament storage solution — a SMART solution!  With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button.  No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops.   This prevents leakage over an extended period of time.<span> </span><strong> <span class="bold">Store your filament easily</span> <span class="bold">without</span> <span class="bold">worrying about leaks.</span> </strong></p>
<p><img loading="lazy" class="aligncenter size-large wp-image-5529" src="https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-951x1024.jpg" alt="" width="951" height="1024" srcset="https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-951x1024.jpg 951w, https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-600x646.jpg 600w, https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-279x300.jpg 279w, https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-768x827.jpg 768w, https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-22x24.jpg 22w, https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-33x36.jpg 33w, https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3-45x48.jpg 45w, https://www.printdry.com/wp-content/uploads/2021/09/4-featurestech3.jpg 1080w" sizes="(max-width: 951px) 100vw, 951px"></p>
<h1 id="h:why-vacuum-storage-i" class="page-anchor">Why vacuum storage is important for filament?</h1>
<p>Excess moisture in filament leads to defects in 3D printing.  If some of your prints look like the pictures below, this may be due to the water content built up in the filament.</p>
<p>Maintaining negative pressure between -20 ~ -25 kPa.</p>
<h1 id="h:one-touch-sealing" class="page-anchor">One Touch Sealing</h1>
<p><img loading="lazy" class="aligncenter size-large wp-image-5533" src="https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-1024x576.gif" alt="" width="1024" height="576" srcset="https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-1024x576.gif 1024w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-600x338.gif 600w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-300x169.gif 300w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-768x432.gif 768w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-24x14.gif 24w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-36x20.gif 36w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-vacuum-min-48x27.gif 48w" sizes="(max-width: 1024px) 100vw, 1024px"></p>
<p><img loading="lazy" class="aligncenter size-full wp-image-5528" src="https://www.printdry.com/wp-content/uploads/2021/09/push3.jpg" alt="" width="989" height="774" srcset="https://www.printdry.com/wp-content/uploads/2021/09/push3.jpg 989w, https://www.printdry.com/wp-content/uploads/2021/09/push3-600x470.jpg 600w, https://www.printdry.com/wp-content/uploads/2021/09/push3-300x235.jpg 300w, https://www.printdry.com/wp-content/uploads/2021/09/push3-768x601.jpg 768w, https://www.printdry.com/wp-content/uploads/2021/09/push3-24x19.jpg 24w, https://www.printdry.com/wp-content/uploads/2021/09/push3-36x28.jpg 36w, https://www.printdry.com/wp-content/uploads/2021/09/push3-48x38.jpg 48w" sizes="(max-width: 989px) 100vw, 989px"></p>
<h1 id="h:hold-up-to-3-spools" class="page-anchor">
<span class="bold">Hold</span> Up To <span class="bold">3 Spools </span>
</h1>
<p><img loading="lazy" class="aligncenter size-full wp-image-5525" src="https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418.jpg" alt="" width="1000" height="677" srcset="https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418.jpg 1000w, https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418-600x406.jpg 600w, https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418-300x203.jpg 300w, https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418-768x520.jpg 768w, https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418-24x16.jpg 24w, https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418-36x24.jpg 36w, https://www.printdry.com/wp-content/uploads/2021/09/IMG_8418-48x32.jpg 48w" sizes="(max-width: 1000px) 100vw, 1000px"></p>
<h1 id="h:one-touch-to-open" class="page-anchor">
<span class="bold">One-touch To</span> Open</h1>
<p><img loading="lazy" class="aligncenter size-large wp-image-5532" src="https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-1024x576.gif" alt="" width="1024" height="576" srcset="https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-1024x576.gif 1024w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-600x338.gif 600w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-300x169.gif 300w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-768x432.gif 768w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-24x14.gif 24w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-36x20.gif 36w, https://www.printdry.com/wp-content/uploads/2021/09/gif-2_1-release-min-48x27.gif 48w" sizes="(max-width: 1024px) 100vw, 1024px"></p>
<h1 id="h:rechargeable-battery" class="page-anchor"><span class="bold">Rechargeable Battery</span></h1>
<p>The battery last about 2 months if only opening and closing once a day.</p>
<p><img loading="lazy" class="aligncenter size-large wp-image-5534" src="https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-1024x576.gif" alt="" width="1024" height="576" srcset="https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-1024x576.gif 1024w, https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-600x338.gif 600w, https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-300x169.gif 300w, https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-768x432.gif 768w, https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-24x14.gif 24w, https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-36x20.gif 36w, https://www.printdry.com/wp-content/uploads/2021/09/gif3_2-min-48x27.gif 48w" sizes="(max-width: 1024px) 100vw, 1024px"></p>
<p> </p>
<p><img loading="lazy" class="aligncenter size-full wp-image-5530" src="https://www.printdry.com/wp-content/uploads/2021/09/charging-cable.jpg" alt="" width="1020" height="867" srcset="https://www.printdry.com/wp-content/uploads/2021/09/charging-cable.jpg 1020w, https://www.printdry.com/wp-content/uploads/2021/09/charging-cable-600x510.jpg 600w, https://www.printdry.com/wp-content/uploads/2021/09/charging-cable-300x255.jpg 300w, https://www.printdry.com/wp-content/uploads/2021/09/charging-cable-768x653.jpg 768w, https://www.printdry.com/wp-content/uploads/2021/09/charging-cable-24x20.jpg 24w, https://www.printdry.com/wp-content/uploads/2021/09/charging-cable-36x31.jpg 36w, https://www.printdry.com/wp-content/uploads/2021/09/charging-cable-48x41.jpg 48w" sizes="(max-width: 1020px) 100vw, 1020px"></p>
<h1 id="h:additional-features" class="page-anchor">Additional Features:</h1>
<p><img loading="lazy" class="aligncenter size-large wp-image-5531" src="https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-931x1024.jpg" alt="" width="931" height="1024" srcset="https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-931x1024.jpg 931w, https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-600x660.jpg 600w, https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-273x300.jpg 273w, https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-768x845.jpg 768w, https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-22x24.jpg 22w, https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-33x36.jpg 33w, https://www.printdry.com/wp-content/uploads/2021/09/feature2-2-44x48.jpg 44w, https://www.printdry.com/wp-content/uploads/2021/09/feature2-2.jpg 1080w" sizes="(max-width: 931px) 100vw, 931px"></p>
<h1 id="h:specifications" class="page-anchor"><span class="bold">Specifications:</span></h1>
<p><img loading="lazy" class="aligncenter size-large wp-image-5526" src="https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-960x1024.jpg" alt="" width="960" height="1024" srcset="https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-960x1024.jpg 960w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-600x640.jpg 600w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-281x300.jpg 281w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-768x820.jpg 768w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-1439x1536.jpg 1439w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-1170x1249.jpg 1170w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-22x24.jpg 22w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-34x36.jpg 34w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications-45x48.jpg 45w, https://www.printdry.com/wp-content/uploads/2021/09/SC225_specifications.jpg 1458w" sizes="(max-width: 960px) 100vw, 960px"></p>

PrintDry Smart Vacuum Filament Container

Bundle Includes: PrintDry Filament Dryer PrintDry Large Spool Kit PrintDry Additional Chamber Kit PrintDry Vaccum Container

<p>Bundle Includes:</p>
<ul>
<li>PrintDry Filament Dryer</li>
<li>PrintDry Large Spool Kit</li>
<li>PrintDry Additional Chamber Kit</li>
<li>PrintDry Vaccum Container</li>
</ul>

PrintDry Filament Dryer Bundle

The package includes: Drywise Filament Dryer Drywise Pre-Heater Pack of O-Rings (pack of 10) Pack of Desiccant (pack of 2) Ultimate Material Quality Control Significant Time Savings Valuable time is gained thanks to the quasi instant drying, a feature of the in-line drying architecture. Further, the pre-calibrated settings for certified materials eliminate guesswork and remove the need to research settings. Shorter Time to Part Drying in-line is much more efficient and effective, eliminating prolonged drying times as it dries during printing. Higher Machine Uptime No pre planning is needed meaning getting full utilisation of your machines is now possible, more easily. Lower Energy Costs Due to the superior drying efficiency. Also, does not require auxiliary devices to maintain the filament in a good state. Minimized Material Waste Guaranteed excellent material quality control before and during the print. Streamlined, Reliable Process Drywise eliminates uncertainties when it comes to material quality control, respecting the material whilst giving the best performing parts.

<p data-mce-fragment="1"><strong data-mce-fragment="1">The package includes:</strong></p>
<ul>
<li>Drywise Filament Dryer</li>
<li>Drywise Pre-Heater</li>
<li>Pack of O-Rings (pack of 10)</li>
<li>Pack of Desiccant (pack of 2)</li>
</ul>
<h3 data-lh-lang="" data-lhi="txt_title" class="lh-title">Ultimate Material Quality Control</h3>
<div class="lh-item">
<div class="lh-text">
<h5 data-lhis="list_item-title" data-lh-lang="" data-lhi="list_item[0]title" class="lh-item-title">Significant Time Savings</h5>
<div data-lhis="list_item-des" data-lh-lang="" data-lhi="list_item[0]des" class="lh-desc">Valuable time is gained thanks to the quasi instant drying, a feature of the in-line drying architecture. Further, the pre-calibrated settings for certified materials eliminate guesswork and remove the need to research settings.</div>
</div>
</div>
<div class="lh-item">
<div class="lh-item-icon">
<p class="lh-icon-font"> </p>
</div>
<div class="lh-text">
<h5 data-lhis="list_item-title" data-lh-lang="" data-lhi="list_item[1]title" class="lh-item-title">Shorter Time to Part</h5>
<div data-lhis="list_item-des" data-lh-lang="" data-lhi="list_item[1]des" class="lh-desc">Drying in-line is much more efficient and effective, eliminating prolonged drying times as it dries during printing.</div>
</div>
</div>
<div class="lh-item">
<div class="lh-item-icon">
<p class="lh-icon-font"> </p>
</div>
<div class="lh-text">
<h5 data-lhis="list_item-title" data-lh-lang="" data-lhi="list_item[2]title" class="lh-item-title">Higher Machine Uptime</h5>
<div data-lhis="list_item-des" data-lh-lang="" data-lhi="list_item[2]des" class="lh-desc">No pre planning is needed meaning getting full utilisation of your machines is now possible, more easily.</div>
</div>
</div>
<div class="lh-item">
<div class="lh-item-icon">
<p class="lh-icon-font"> </p>
</div>
<div class="lh-text">
<h5 data-lhis="list_item-title" data-lh-lang="" data-lhi="list_item[3]title" class="lh-item-title">Lower Energy Costs</h5>
<div data-lhis="list_item-des" data-lh-lang="" data-lhi="list_item[3]des" class="lh-desc">Due to the superior drying efficiency. Also, does not require auxiliary devices to maintain the filament in a good state.</div>
</div>
</div>
<div class="lh-item">
<div class="lh-item-icon">
<p class="lh-icon-font"> </p>
</div>
<div class="lh-text">
<h5 data-lhis="list_item-title" data-lh-lang="" data-lhi="list_item[4]title" class="lh-item-title">Minimized Material Waste</h5>
<div data-lhis="list_item-des" data-lh-lang="" data-lhi="list_item[4]des" class="lh-desc">Guaranteed excellent material quality control before and during the print.</div>
</div>
</div>
<div class="lh-item">
<div class="lh-item-icon">
<p class="lh-icon-font"> </p>
</div>
<div class="lh-text">
<h5 data-lhis="list_item-title" data-lh-lang="" data-lhi="list_item[5]title" class="lh-item-title">Streamlined, Reliable Process</h5>
<div data-lhis="list_item-des" data-lh-lang="" data-lhi="list_item[5]des" class="lh-desc">Drywise eliminates uncertainties when it comes to material quality control, respecting the material whilst giving the best performing parts.</div>
</div>
</div>

Drywise In-Line Filament Dryer Bundle (1.75mm)

Polymaker offers 3D printing accessories to optimize the user experience with their filaments. PolyBox is a dry storage box designed to provide the optimum environment for 3D printing filaments. The PolyBox is compatible with all 3D printers and can house two 1kg spools or one 3kg spool. Desiccant Type: Silica gel Desiccant Specifications: 2*Desiccant sachets 100g Supported Filament spools: 2 spools x 52cm (width) or 1 spool x 120cm (width) Humidity Range: 10-99% (5%) Resolution: 1% Response: 10 seconds Temperature Range: -50-70 C (1C) Battery Specifications: LR44

<p>Polymaker offers 3D printing accessories to optimize the user experience with their filaments.</p>
<p>PolyBox is a dry storage box designed to provide the optimum environment for 3D printing filaments. The PolyBox is compatible with all 3D printers and can house two 1kg spools or one 3kg spool.</p>
<ul>
<li>Desiccant Type: Silica gel</li>
<li>Desiccant Specifications: 2*Desiccant sachets 100g</li>
<li>Supported Filament spools: 2 spools x 52cm (width) or 1 spool x 120cm (width)</li>
<li>Humidity Range: 10-99% (5%)</li>
<li>Resolution: 1%</li>
<li>Response: 10 seconds</li>
<li>Temperature Range: -50-70 C (1C)</li>
<li>Battery Specifications: LR44</li>
</ul>

Accessories

Filter Price

Brand

PrintDry Filament Dryer (PRO3)

PrintDry Large Spool Kit for Dryer PRO/P...

PrintDry Vaccum Container (5 Pack)

PrintDry Additional Chamber Kit for Drye...

PrintDry Smart Vacuum Filament Container

PrintDry Filament Dryer Bundle

Drywise In-Line Filament Dryer Bundle (1...

PolyBox Edition II

Accessories

Products

Categories

Filter Price

Brand

PrintDry Filament Dryer (PRO3)

PrintDry Large Spool Kit for Dryer PRO/P...

PrintDry Vaccum Container (5 Pack)

PrintDry Additional Chamber Kit for Drye...

PrintDry Smart Vacuum Filament Container

PrintDry Filament Dryer Bundle

Drywise In-Line Filament Dryer Bundle (1...

PolyBox Edition II